IDROSAND series 230
Multistage submersible pumps for installations in agricultural civil and industrial environments. Suitable to pump clean water from boreholes, tanks and reservoirs.
Application
They are recommended to pressurize water plants in block of flats, industries, fire-fighting sets and irrigation systems.
Construction
- Coolant filled rewindable electric motor (4" motors) or water filled rewindable electric motor (6" motors) with phase insulators to protect the motor from power peaks, as a guarantee of a highly-trustworthy product.
- Resin-insulated cable kit to prevent penetration of water inside the motor.
- Shafts machined on ball bearings and mechanical seals location.
- Both shaft and coupling meet NEMA standards.
Materials
| PUMP END | |
|---|---|
| Head and suction body | Mechanical cast iron EN GJL-200 |
| Casing / Diffuser body | Stainless steel AISI304 |
| Tie-rods | Stainless steel AISI304 |
| Shaft | Stainless steel AISI420B |
| Coupling | Stainless steel AISI416B |
| Impellers and diffusers | Noryl® reinforced with fibre-glass, certified for drinking water and AISI 304 stainless steel wear rings |
| Top bush | Desmopan® with rotating element in chromium-plated brass |
| Check valve | Stainless steel AISI304 |
| MOTORS | 4" series S | 6" |
|---|---|---|
| Casing | Stainless Steel AISI304 | Stainless Steel AISI304 |
| Shaft Terminal | Stainless Steel AISI303 | Stainless Steel AISI420B |
| Upper body | Brass OT58 | Mechanical cast iron with electrophoresis paint EN GJL-250 or brass OT58 |
| Elastomers | NBR rubber | NBR rubber |
| Mechanical seal | Graphite and alumina | Graphite and alumina |
| Foot | ABS | |
| Cable | PVC ACS AD8 (for permanent immersion in drinking water) | PVC ACS AD8 (for permanent immersion in drinking water) |
Certifications
 | Eco-friendly design (MEI index ≥ 0.4). |
 | This important certification, released by an Agency accredited by the French Ministry of Health, attests that the pumps IDROSAND series /230 can be used to pump drinkable water. |
 | For applications with high sand content. |
SUPPLIED WITH
Capacitor (single-phase versions)
Items
| Code | Model | Version | P2 (Kw) | No. of poles | Flow (l/min) | Head (m) |
|---|---|---|---|---|---|---|
| CM230/06 | IDROSAND 6/230 2 HP 1~ 230V | Single-phase 230V | 1.50 | 2 | 90 - 150 - 230 | 51.00 - 40.00 - 15.00 |
| CM230/08 | IDROSAND 8/230 HP3 1~ 230V | Single-phase 230V | 2.20 | 2 | 90 - 150 - 230 | 67.00 - 52.00 - 20.00 |
| CM230/09 | IDROSAND 9/230 HP3 1~ 230V | Single-phase 230V | 2.20 | 2 | 90 - 150 - 230 | 75.00 - 59.00 - 24.00 |
| CT230/06 | IDROSAND 6/230 HP2 3~ 400V | Three-phase 400V | 1.50 | 2 | 90 - 150 - 230 | 51.00 - 40.00 - 15.00 |
| CT230/08 | IDROSAND 8/230 HP3 3~ 400V | Three-phase 400V | 2.20 | 2 | 90 - 150 - 230 | 67.00 - 52.00 - 20.00 |
| CT230/09 | IDROSAND 9/230 HP3 3~ 400V | Three-phase 400V | 2.20 | 2 | 90 - 150 - 230 | 75.00 - 59.00 - 24.00 |
| CT230/11 | IDROSAND 11/230 HP4 3~ 400V | Three-phase 400V | 3.00 | 2 | 90 - 150 - 230 | 93.00 - 74.00 - 33.00 |
| CT230/14 | IDROSAND 14/230 HP5,5 3~ 400V | Three-phase 400V | 4.00 | 2 | 90 - 150 - 230 | 125.00 - 99.00 - 43.00 |
| CTA230/17 | IDROSAND17/230 HP7,5 3~ 400V | Three-phase 400V | 5.50 | 2 | 90 - 150 - 230 | 150.00 - 118.00 - 52.00 |
| CTA230/20 | IDROSAND20/230 HP7,5 3~ 400V | Three-phase 400V | 5.50 | 2 | 90 - 150 - 230 | 174.00 - 141.00 - 62.00 |
| CTA230/24 | IDROSAND24/230 HP10 3~ 400V | Three-phase 400V | 7.50 | 2 | 90 - 150 - 230 | 207.00 - 166.00 - 77.00 |
| CTA230/28 | IDROSAND28/230 HP10 3~ 400V | Three-phase 400V | 7.50 | 2 | 90 - 150 - 230 | 250.00 - 199.00 - 88.00 |
| CTA230/34 | IDROSAND34/230 HP12,5 3~ 400V | Three-phase 400V | 9.20 | 2 | 90 - 150 - 230 | 307.00 - 241.00 - 106.00 |
| CTA230/40 | IDROSAND40/230 HP15 3~ 400V | Three-phase 400V | 11.00 | 2 | 90 - 150 - 230 | 361.00 - 288.00 - 132.00 |